Decoder Installation - Bromsgrove Models

Post Reply
User avatar
bulleidboy
Posts: 660
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Decoder Installation - Bromsgrove Models

#1

Post by bulleidboy » Thu Feb 06, 2020 9:46 am

I don't know how many of you use or look at this site, but it's well worth a look. It appears to have been updated - in fact it says last done on 3rd January 2020. If you read the "small print" there is now information about setting CV's etc. and lots of close-up pictures.
http://www.bromsgrovemodels.co.uk/decod ... ion4mm.htm
[b "No pleasure is worth giving up for the sake of two more years in a geriatric home in Weston-super-Mare" - Kingsley Amis[/b]

Chris
Posts: 100
Joined: Thu Oct 18, 2018 6:24 pm
Contact:

Re: Decoder Installation - Bromsgrove Models

#2

Post by Chris » Thu Feb 06, 2020 12:17 pm

A very good source of information, certainly worth a read before trying your own modification and having to reinvent the wheel.

Not that well updated, still refers to Maplin as a local electronics supplier.

scratchbuilt
Posts: 20
Joined: Thu Oct 04, 2018 8:10 pm
Contact:

Re: Decoder Installation - Bromsgrove Models

#3

Post by scratchbuilt » Thu Feb 06, 2020 7:39 pm

Maplins still available online:-

https://www.maplin.co.uk/

User avatar
RAF96
Posts: 268
Joined: Fri Oct 05, 2018 6:33 am
Location: Dereham, Norfolk, UK
Contact:

Re: Decoder Installation - Bromsgrove Models

#4

Post by RAF96 » Fri Feb 07, 2020 1:58 pm

scratchbuilt wrote:
Thu Feb 06, 2020 7:39 pm
Maplins still available online:-

https://www.maplin.co.uk/
But they don’t flog all the useful bits they used to nor do they have a shop counter where you could go and say to a human, have you got one of these.

BromsMods
Posts: 4
Joined: Fri Apr 19, 2019 6:55 pm
Contact:

Re: Decoder Installation - Bromsgrove Models

#5

Post by BromsMods » Sat Feb 08, 2020 2:59 pm

Chris wrote:
Thu Feb 06, 2020 12:17 pm
Not that well updated, still refers to Maplin as a local electronics supplier.

Can you tell me where, please? Save me a lot of time trying to find a single reference in hundreds of pages!

Chris
Posts: 100
Joined: Thu Oct 18, 2018 6:24 pm
Contact:

Re: Decoder Installation - Bromsgrove Models

#6

Post by Chris » Sun Feb 09, 2020 7:28 pm

BromsMods wrote:
Sat Feb 08, 2020 2:59 pm
Chris wrote:
Thu Feb 06, 2020 12:17 pm
Not that well updated, still refers to Maplin as a local electronics supplier.

Can you tell me where, please? Save me a lot of time trying to find a single reference in hundreds of pages!
Class 43 HST DCC conversion http://s374444733.websitehome.co.uk/class-43/index.htm

that took a lot of finding,

BromsMods
Posts: 4
Joined: Fri Apr 19, 2019 6:55 pm
Contact:

Re: Decoder Installation - Bromsgrove Models

#7

Post by BromsMods » Mon Feb 10, 2020 9:16 am

Thanks Chris

However that is only a link to another website and I do not have any control of the content on that.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests