Insulfrog points and seep motors

Post Reply
station master
Posts: 22
Joined: Tue Oct 09, 2018 9:07 am
Location: North West
Contact:

Insulfrog points and seep motors

#1

Post by station master » Wed Oct 09, 2019 10:38 am

Hi all

Does anyone have a basic wiring diagram for an insulfrog point and a seep motor, with momentary switch?

Can not seem to find one on the great wide web

G

User avatar
Brian
Site Admin
Posts: 882
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: Insulfrog points and seep motors

#2

Post by Brian » Wed Oct 09, 2019 11:05 am

Wire as below.

Assuming toggle switches, then the switches outer tabs to Seep A & B. Seep C to Power supply return or CDU Negative - output. Middle tabs of all switches are linked together and from one middle tab a wire goes to the CDU Positive + output terminal or the power supply other connection.
Seep tabs D, E & F are not used for points on an Insulated frog point and therefore can be used for other functions like point position indicators or colour light signal controls etc. Ideally use 16/0.2mm wire throughout.
Attachments
Basic Seep wiring.jpg
Basic Seep wiring.jpg (155.07 KiB) Viewed 707 times
Image << Click the Icon to go to my website

station master
Posts: 22
Joined: Tue Oct 09, 2018 9:07 am
Location: North West
Contact:

Re: Insulfrog points and seep motors

#3

Post by station master » Wed Oct 09, 2019 11:22 am

Brian you are a legend!!!

This is wonderful many thanks

G

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests