hornby R3244TTS Duke of Gloucester

User avatar
dtb
Posts: 168
Joined: Thu Oct 04, 2018 10:07 pm
Location: 9C but now near to 9D
Contact:

hornby R3244TTS Duke of Gloucester

#1

Post by dtb » Sun Aug 02, 2020 1:44 pm

Small issue with the above

On DCC SS128, slow running from 003 to 020 loco jerks as it slowly runs, issue clears as the speed is increased.
It's a pre-owned loco and DC running is enabled, wheels clean, track clean etc etc

I will turn DC running off and put it on the rolling road for an hour but apart from that another suggestions before it goes back please.

Thanks
Image

User avatar
yelrow
Posts: 636
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgandy, France
Contact:

Re: hornby R3244TTS Duke of Gloucester

#2

Post by yelrow » Sun Aug 02, 2020 1:56 pm

i belive this has come up on Hornby forum, DOG, is well named, for having the odd fault.

User avatar
Rog (RJ)
Site Admin
Posts: 597
Joined: Thu Oct 04, 2018 5:49 pm
Location: South Nottingham
Contact:

Re: hornby R3244TTS Duke of Gloucester

#3

Post by Rog (RJ) » Sun Aug 02, 2020 2:54 pm

What decoder are you using? Some do show these strange speed changes.

User avatar
dtb
Posts: 168
Joined: Thu Oct 04, 2018 10:07 pm
Location: 9C but now near to 9D
Contact:

Re: hornby R3244TTS Duke of Gloucester

#4

Post by dtb » Sun Aug 02, 2020 3:12 pm

Rog (RJ) wrote:
Sun Aug 02, 2020 2:54 pm
What decoder are you using? Some do show these strange speed changes.
Factory fitted TTS
Image

User avatar
Rog (RJ)
Site Admin
Posts: 597
Joined: Thu Oct 04, 2018 5:49 pm
Location: South Nottingham
Contact:

Re: hornby R3244TTS Duke of Gloucester

#5

Post by Rog (RJ) » Sun Aug 02, 2020 3:16 pm

Not much adjustment on those unfortunately.

User avatar
Steve M
Posts: 1611
Joined: Thu Oct 04, 2018 5:29 pm
Location: Rochester, Kent
Contact:

Re: hornby R3244TTS Duke of Gloucester

#6

Post by Steve M » Sun Aug 02, 2020 4:39 pm

I think CV 150 is set to 0 as the default, try setting it to 1 as that can help jerky running with TTS decoders.
I’m not a complete idiot, some pieces are missing. ;)

User avatar
dtb
Posts: 168
Joined: Thu Oct 04, 2018 10:07 pm
Location: 9C but now near to 9D
Contact:

Re: hornby R3244TTS Duke of Gloucester

#7

Post by dtb » Sun Aug 02, 2020 7:27 pm

Thanks all

I searched the Hornby forum on Yelrow's suggestion and found a post that along with CV150 also to change CV154 and CV155. Going for a play now, will let you know.
Image

User avatar
yelrow
Posts: 636
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgandy, France
Contact:

Re: hornby R3244TTS Duke of Gloucester

#8

Post by yelrow » Sun Aug 02, 2020 8:34 pm

Glad to be of service.

User avatar
dtb
Posts: 168
Joined: Thu Oct 04, 2018 10:07 pm
Location: 9C but now near to 9D
Contact:

Re: hornby R3244TTS Duke of Gloucester

#9

Post by dtb » Mon Aug 03, 2020 1:32 pm

changed CV150 from 0 to 1 and all is well, didn't bother with 154 /155

thanks very much all
Image

User avatar
yelrow
Posts: 636
Joined: Thu Oct 04, 2018 6:54 pm
Location: Burgandy, France
Contact:

Re: hornby R3244TTS Duke of Gloucester

#10

Post by yelrow » Mon Aug 03, 2020 5:05 pm

Presume, cheque is in the post.

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests