Welcome to the Model Railway Forum.
Please post only items of model railway or other related interest items.

NOTE: Users of the forum prior to September 2018 must re register with a User Name and Password.
Old pre Sept.'18 log in details will not work.

Joining "thin" wires

User avatar
bulleidboy
Posts: 1141
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Joining "thin" wires

#21

Post by bulleidboy »

I fitted a new tip to the iron and binned about a metre of solder off of the roll, and it appears to be working. I have a new roll of solder on order.
Tomorrow will be a good day. - Capt.Sir Tom Moore
User avatar
Brian
Site Admin
Posts: 1170
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: Joining "thin" wires

#22

Post by Brian »

bulleidboy wrote: Fri Jul 24, 2020 2:34 pm I have a new roll of solder on order.
Not Lead free hopefully! ;)
Image << Click the Icon to go to my website
User avatar
bulleidboy
Posts: 1141
Joined: Thu Oct 04, 2018 6:30 pm
Location: Basingstoke, Hants
Contact:

Re: Joining "thin" wires

#23

Post by bulleidboy »

Brian wrote: Fri Jul 24, 2020 3:23 pm
bulleidboy wrote: Fri Jul 24, 2020 2:34 pm I have a new roll of solder on order.
Not Lead free hopefully! ;)
Certainly not! :D
Tomorrow will be a good day. - Capt.Sir Tom Moore
sandy
Posts: 133
Joined: Sat Feb 15, 2020 11:05 pm
Location: Gretna
Contact:

Re: Joining "thin" wires

#24

Post by sandy »

Is it possible that the wire you have is made of Aluminium, You can get Ally wire. I have never used it myself. Just a thought.
Sandy
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests