transformer connect

Post Reply
Posts: 42
Joined: Fri Feb 05, 2021 8:31 am

transformer connect


Post by tommyrob123 »

can a hornby 4amp transformer connect to a Bachmann 36-505 Dynamis wireless DCC Digital Railway Controller which is only 2.3amp
User avatar
Site Admin
Posts: 1582
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent

Re: transformer connect


Post by Brian »

Probably not. The Hornby 15volt 4.0Amps DC PSU output may be too much for the EZ under full load or overload conditions? A lot depend on how the EZ treats over loads.
The moulded barrel DC plug will most likely be the wrong size too as Hornby use a large 6.3mm x 3.1mm plug.

If you're thinking that by using a 4.0Amp PSU to feed the Dynamis you can have more track power, that is unlikely to be the case either.
Image << Click the Icon to go to my website
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests