DCC Chip install Bachmann Class 24/1

Post Reply
User avatar
GaryH
Posts: 24
Joined: Thu Jan 07, 2021 3:27 pm
Location: North Herts
Contact:

DCC Chip install Bachmann Class 24/1

#1

Post by GaryH »

Help Please just got the Bachmann class 24/1 and am trying to fit DCC chip but as hard as I try cant remove body from chassis instructions state gently remove body ???? feels like it still screwed on but have removed all six screws as per Instructions
User avatar
Brian
Site Admin
Posts: 1568
Joined: Thu Oct 04, 2018 3:49 pm
Location: SE Kent
Contact:

Re: DCC Chip install Bachmann Class 24/1

#2

Post by Brian »

Hi
If you're 100% sure all screws have been removed, then...
Try inserting several pieces of card (post card thickness) i.e. cardboard or Plastikard, around the body between the body shell and the locos chassis. I would cut a minimum of six pieces of card and each about 2" x !" (50mm x 25mm) inserting them at each end and middle, then gently ease the body away from the chassis.
Image << Click the Icon to go to my website
User avatar
GaryH
Posts: 24
Joined: Thu Jan 07, 2021 3:27 pm
Location: North Herts
Contact:

Re: DCC Chip install Bachmann Class 24/1

#3

Post by GaryH »

Thank You Brian Sorted Now just being a idiot took wrong screws out
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests