dcc concepts decoder

Post Reply
mickrick
Posts: 13
Joined: Thu Oct 18, 2018 10:00 pm
Contact:

dcc concepts decoder

#1

Post by mickrick » Thu May 21, 2020 9:47 pm

Can anybody help please.I have a DCC concepts decoder with no other ID.It measures 20mm long and 12mm wide and is a 9 pin device.I need a 9 pin harness for it but have been unable to find one after hours of searching DCC concepts catalogue.I have bought a 9 pin JST style connector(810135) but the connector is too large to fit.any ideas anybody.thanks

User avatar
cadman
Posts: 33
Joined: Thu Oct 04, 2018 6:37 pm
Location: Leighton Buzzard
Contact:

Re: dcc concepts decoder

#2

Post by cadman » Thu May 21, 2020 10:09 pm

Surely this is the correct harness..............HB
Attachments
8to9pin harness dcc concepts.png
8to9pin harness dcc concepts.png (25.67 KiB) Viewed 561 times

mickrick
Posts: 13
Joined: Thu Oct 18, 2018 10:00 pm
Contact:

Re: dcc concepts decoder

#3

Post by mickrick » Fri May 22, 2020 7:30 am

Thanks for info,it may well be the correct one,but it looks identical to the one I purchased.need to know physical size of connector.where was this info you have posted please

User avatar
Walkingthedog
Posts: 2599
Joined: Thu Oct 04, 2018 5:51 pm
Location: HAZLEMERE, BUCKS.
Contact:

Re: dcc concepts decoder

#4

Post by Walkingthedog » Fri May 22, 2020 10:52 am

Nurse, the screens!

User avatar
dtb
Posts: 168
Joined: Thu Oct 04, 2018 10:07 pm
Location: 9C but now near to 9D
Contact:

Re: dcc concepts decoder

#5

Post by dtb » Fri May 22, 2020 11:03 am

mickrick wrote:
Fri May 22, 2020 7:30 am
Thanks for info,it may well be the correct one,but it looks identical to the one I purchased.need to know physical size of connector.where was this info you have posted please
from DCC Concepts I think, see link below
https://www.dccconcepts.com/product/dec ... st-3-pack/
Image

User avatar
cadman
Posts: 33
Joined: Thu Oct 04, 2018 6:37 pm
Location: Leighton Buzzard
Contact:

Re: dcc concepts decoder

#6

Post by cadman » Fri May 22, 2020 11:45 am

From Concepts webpage as already stated..........I have found one in my bits box, the actual plug bit measures 9mm x 2mm..........HB
Attachments
8to9pin harness.png
8to9pin harness.png (801.82 KiB) Viewed 516 times

mickrick
Posts: 13
Joined: Thu Oct 18, 2018 10:00 pm
Contact:

Re: dcc concepts decoder

#7

Post by mickrick » Fri May 22, 2020 7:28 pm

Thanks for confirmation that it is the harness that I need,9x2mm connector size was the clincher.thanks for all your help to you all

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests