Budget Model Railways PWM controller

Post Reply
User avatar
Montfort
Posts: 36
Joined: Fri Oct 05, 2018 12:40 pm
Location: France
Contact:

Budget Model Railways PWM controller

Post by Montfort » Wed Oct 10, 2018 4:32 pm

Hello,
Has anyone ever tried to build the Budget Model Railways PWM controller: https://www.youtube.com/watch?v=T64lhCwN9Ws
All your advices would be very appreciated. Thanks.
No matter which train you are waiting for, the wrong one arrives always first !

User avatar
IanS
Posts: 44
Joined: Thu Oct 04, 2018 6:19 pm
Location: The Original Washington, UK
Contact:

Re: Budget Model Railways PWM controller

Post by IanS » Wed Oct 10, 2018 5:51 pm

I'm tempted - I'm just starting to make my own board from a computer power supply, I've stripped off the connectors, fastening the PSU to the board (an old kitchen door) and fastened a couple of connector blocks with some of the leads coming out of the PSU.
PSU-breakout3.jpg
PSU-breakout3.jpg (47.5 KiB) Viewed 98 times
Next stage for me is to connect up the rest of the wires and then decide what to plug onto them! One idea is a few PWM controllers, one for each siding for the big layout with 3 running tracks and a number of sidings. I'm not sure yet.

User avatar
Montfort
Posts: 36
Joined: Fri Oct 05, 2018 12:40 pm
Location: France
Contact:

Re: Budget Model Railways PWM controller

Post by Montfort » Thu Oct 18, 2018 12:59 pm

Electrical
Hope that helps.
No matter which train you are waiting for, the wrong one arrives always first !

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest