Model Railway Forum.co.uk

oh jesus... Ooops!

I was on point for the date tho, lol.

Can you post a picture of the section in question?

Hi,

Have you sorted this one yet?

if not, let me know (PM is fine) and I'll give you a few steps to run through which may help.

Regards,

Steve

1 x Peco SL-E190 Double slip for sale. Bought from Ebay, but mis-described as a SL-90 (Code 100). Used condition. 3 of the 4 frog feed wires are present, one is missing. Also attached are 2x PL-10 Peco Point motors and 2x PL-15 Switches. point motors not tested by myself, but were reported as 'in go...

Hi David,

Have you done a digital diagram for your layout?

In terms of cable, the recommendation is to use a minimum of 16/0.2 wire for your trackfeeds/droppers.

Regards,

Steve D.

I looked at doing a somewhat similar project using a RPi to interface with a LT train describer device. The selectors on the unit simply closed a circuit for each choice. I used a 12v supply on the describer side to actuate the coil of a 12v relay, for each circuit on the describer side, and then a ...

Hi All, Due to major change in circumstances, the outdoor railway has been 'knocked on its head', as such... I'm now living alone, in a flat. On the upside, it's just me, so I don't have to leave space for anyone else if I don't want to! :lol: Being a flat, I have no outside space to do any kind of ...

the hornby hm6000 unit does allow some sound functions without a decoder.

couple it with a decent bluetooth speaker and you'll have a workable solution.

Stese isjust a nickname... i'm actually Steve. Anyway...i didn't notice until now

I'd highly recommend the Cura profiles provided by CHEP. Use the latest version available for your printer. Have a look for him on Youtube. He also has a very good guide into 'levelling' the bed (it's a process known as tramming, and doesn't have anything to do with a spirit level!). Lots of people ...