Model Railway Forum

Go Back   Model Railway Forum > Model Railway Construction > Wiring & Electronics > Other


Reply
 
Thread Tools Display Modes
Old 02-03-2016, 12:47 PM   #21
RogerB
Moderator
 
RogerB's Avatar
 

Join Date: Jan 2013
Location: Dorset
Posts: 4,766
RogerB is on a distinguished road
Default

You've done what I did BB, thick wire to thin. I wrapped the thin wire around the thick one and then soldered the combined mass and then put heat shrink over the lot. Nightmare stuff isn't it? Especially for those of us who are hard of sight. R-
__________________
I'm not sure if I have loads of free time - or I've just forgotten to do something really important?
OO Gauge : Train Controller Gold via Elite : Block sensors via CTI : Servo motors for points : 9 Locomotives
RogerB is online now   Reply With Quote
Old 02-03-2016, 01:55 PM   #22
Bulleidboy
Senior Member
 
Bulleidboy's Avatar
 

Join Date: Jan 2012
Location: Basingstoke, Hants
Posts: 2,139
Bulleidboy is on a distinguished road
Default

Thanks Richard and Roger - I didn't think there was anything special about it, but thought I would ask. I'll tread carefully! BB
__________________
Diplomacy is the art of telling people to go to hell in such a way that they ask for directions.
Bulleidboy is offline   Reply With Quote
Old 02-03-2016, 02:07 PM   #23
RogerB
Moderator
 
RogerB's Avatar
 

Join Date: Jan 2013
Location: Dorset
Posts: 4,766
RogerB is on a distinguished road
Default

I'm sure you'll be fine. The hardest bit I found was getting rid of the insulation, which is invisible to the naked eye. I tried burning it off with the soldering iron but was not sure that I wasn't causing damage to the wire inside. I ended up running a fine needle file over it. I suppose if the solder sticks - you've done it! R-
__________________
I'm not sure if I have loads of free time - or I've just forgotten to do something really important?
OO Gauge : Train Controller Gold via Elite : Block sensors via CTI : Servo motors for points : 9 Locomotives

Last edited by RogerB; 02-03-2016 at 02:46 PM.
RogerB is online now   Reply With Quote
Old 02-03-2016, 05:57 PM   #24
Steve M
Contrarian
 
Steve M's Avatar
 

Join Date: Nov 2012
Location: Rochester, Kent
Posts: 3,919
Steve M is on a distinguished road
Default

Quote:
Originally Posted by RogerB View Post
I'm sure you'll be fine. The hardest bit I found was getting rid of the insulation, which is invisible to the naked eye. I tried burning it off with the soldering iron but was not sure that I wasn't causing damage to the wire inside. I ended up running a fine needle file over it. I suppose if the solder sticks - you've done it! R-
I think the coating is designed to melt/burn away when you touch it with the iron. Still a bu##er though.
__________________
I'm not arguing with you, I'm explaining why you are wrong.
Steve M is online now   Reply With Quote
Old 02-03-2016, 06:11 PM   #25
Bulleidboy
Senior Member
 
Bulleidboy's Avatar
 

Join Date: Jan 2012
Location: Basingstoke, Hants
Posts: 2,139
Bulleidboy is on a distinguished road
Default

Well, I got one buffer fitted. What probably should have taken thirty minutes, took two hours. The buffers come in packs of two, having fitted one, which didn't work, I came to the conclusion the PCB was duff. The second one I wired up on the bench -it worked, now fitted and all ok. I have taken the power directly from the bus wires. It was at the end of the line, so a convenient way to wire up. I have another pack. I have some others that I bought recently, and they look identical to the Peco buffer stop, except they have a working light, a diode wired in, and more importantly, cheaper than the DCC Concepts version.
__________________
Diplomacy is the art of telling people to go to hell in such a way that they ask for directions.
Bulleidboy is offline   Reply With Quote
Reply

Bookmarks



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 04:10 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.