Model Railway Forum

Go Back   Model Railway Forum > Specific Gauge Topics > O, G & other large scales

O, G & other large scales Large scale model railway topics


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 22-05-2017, 12:06 PM   #1
Mountain Goat
Unique Member.
 
Mountain Goat's Avatar
 

Join Date: Mar 2011
Location: UK.
Posts: 2,376
Mountain Goat is an unknown quantity at this point
Default Making a Start in 7mm Narrow Gauge.

Just added a quick photo of an example of what is needed to make a start. There are many other kits and sets to work on, so don't confine yourself to one set way to do things.
The main consideration if choosing a trainset and a locomotive kit is to make sure the locomotive is suitable for the kit. The main thing to look for with the cheap four wheel locomotives that Hornby provide in their cheaper trainsets is that the locomotive has piston rods going into cylinders or if it does not. If it does not, the choice of kit is more limiting so try to get a set with a loco that has piston rods if you can. (Second photo shows a close up of piston rods and cylinders)
I included pictures of kits from Smallbrook Studio as an example as I happen to have them handy. There are other kits.
The track may be 00 gauge track but some narrow gauge lines did have thin stick like sleepers that needed to be tightly spaced, usually found on temporarily laid lines or on lines on a very tight budget.
There is nothing wrong with using tension lock couplings in this scale, especially the smaller type as they don't look too far off the look of some narrow gauge coupling systems. I've even seen a picture of an industrial locomotive that has a buffer coupling resembling a large tension lock loop though it didn't have the hook part.
While some Small brook Studio wagon kits are made for Dapol wagon chassis, the hornby chassis are not too difficult to convert for use on these kits.
I write this because I had the thought that there is a lack of a starter train set in this lovely scale and gauge so I hope to show with this short thread a way to begin.
Of course, there are many other kits from other manufacturers. I use kits from Smallbrook Studio as I have found them to be reasonably priced and relatively easy to build. If you can paint with a small brush, drill a few small holes and gently file and glue, then you can build these kits!
Peco make some lovely ready painted coach kits (Though they don't have interiors... I made my own interior seats etc from wood) and they look good and apart from a few fiddly door handles, they are relatively easy to make.
While my views may be simplistic, there is not a lot to it to make a start and though most of us will make the odd mistake in building, mistakes are normally easy to put right with the blessing of modelling clay and super glue or variants of various bits and pieces, so don't be scared to make a start. Go for it!
Attached Images
File Type: jpg IMG_20170521_112231.jpg (326.5 KB, 32 views)
File Type: jpg IMG_20170521_112809.jpg (245.2 KB, 29 views)

Last edited by Mountain Goat; 22-05-2017 at 12:08 PM.
Mountain Goat is offline   Reply With Quote
 

Bookmarks



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 10:56 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.