Model Railway Forum

Go Back   Model Railway Forum > Model Railway Construction > Wiring & Electronics

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 29-05-2016, 10:33 PM   #1
Chuff Chuff

Join Date: May 2013
Posts: 41
Chuff Chuff is on a distinguished road
Default Seep PM1 Point Motor

Hope some one can guide me on Seep Motors
I have been trying to install a seep PM1 Point Motor but hit a problem a very frustrating one, I have wired up a seep Pm1 to a peco electrofrog point but the problem is it throws one way but not the other.
It is wired up as follows: A&B To a On (Off)On momentary switch. C To 12v Dc power Supply. D to DCC Poss. E To DCC Neg. And F to the frog. And the 12 VOLT DC + to the center of the toggle switch. I have checked ensure that the throw bar has enough clearance which it seems to have. When it throws one way and I try to throw it the other way it buzzes with out moving it is very frustrating as I have another 4 to do. Any Ideas/tips will be greatly appreciated. Thankyou.
Chuff Chuff is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 09:08 AM.

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.