Model Railway Forum

Go Back   Model Railway Forum > Model Railway Construction > Wiring & Electronics


Reply
 
Thread Tools Display Modes
Old 20-08-2017, 07:17 PM   #1
northwestpaul
Member
 
northwestpaul's Avatar
 

Join Date: Oct 2011
Location: Southport
Posts: 77
northwestpaul is on a distinguished road
Default diamaond wiring help

Help I have put in a SL-E194 diamond crossover on my layout with 2 points. so I can run from the outer main across the inner main to a siding, am using dc but want to be able to change to dcc when I have to with out any wiring changes,
the point motors in using are dcc concepts ip digital so they have built in switch's for changing the frog but I need help a wiring diagram for the 4 frog droppers but only two built in switchs. can anyone help please.
Attached Images
File Type: jpg track change over.jpg (896.6 KB, 32 views)
northwestpaul is offline   Reply With Quote
Old 20-08-2017, 10:37 PM   #2
RFS
Senior Member
 

Join Date: Sep 2014
Location: South Derbyshire
Posts: 284
RFS is on a distinguished road
Default

With DCC it's easy. There are 4 frogs numbered 1-4 reading from left to right on your picture. Frogs 1 and 3 always need the same polarity so are simply wired together and switched from LH point motor using 1 switch. Likewise 2 and 4 are wired together and switched by RH the point motor. All you need to remember is that, when a train is taking the centre road of the 3 lines, the points must also be set to the straight direction and not over the crossing. Otherwise the train will short on the diamond.

For DC - assuming the centre road is using a different controller to the other two lines - then you will need to switch each diamond frog separately using the second switch on the Cobalt, with this switch being fed from the supply to the centre road. You have one switch on each point motor - 1 for each frog. Once again you just need to remember to set the points to the straight road when using the centre track.

This arrangement for DC will also work for DCC when you come to start using that.

Last edited by RFS; 21-08-2017 at 12:31 AM.
RFS is offline   Reply With Quote
Old 21-08-2017, 09:17 AM   #3
RFS
Senior Member
 

Join Date: Sep 2014
Location: South Derbyshire
Posts: 284
RFS is on a distinguished road
Default

Update: for DC you may need extra switches depending on whether the tracks have separate controllers. There's a wiring diagram for this in the Peco instructions which you can download from here -

http://www.peco-uk.com/imageselector...20Turnouts.pdf

Diagram 6 is the relevant one.
RFS is offline   Reply With Quote
Reply

Bookmarks



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 03:11 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.