View Single Post
Old 21-08-2017, 08:51 PM   #4
Flashbang's Avatar

Join Date: Jul 2009
Location: SE UK
Posts: 8,367
Flashbang will become famous soon enough

Not in series they won't work well if at all.
Best is to wire each motor directly from the same switch or passing contact lever. Run two pairs of operating wires from the switch of roughly the same length to each motors coil. Then connect together their returns. Use 16/0.2mm wire minimum. You use the same switch contacts for both motors.
Otherwise connect one operation wire from one motors coil to the other, then do the same with the other coils. Parallel connect them. Ideally in either case the return should be a larger wire size.
Broken? It was working when I left it!
Flashbang is offline   Reply With Quote